Archive for December, 2017

Bead roller.

December 27th, 2017

I should be assembling my clutch so I can then take all the rotating bits off top be balanced. But I was looking at the clutch lever pins and they are slightly worn so I think I will get new ones. That means making an order to the UK so first I want to go […]

Boot lid – second attempt!

December 19th, 2017

Yes, I had to remake the boot lid from scratch. For two reasons: 1, my initial attempt at wiring the edge went very wrong and 2, I measured it wrong so even if it had gone right it wouldn’t have fitted! So I made another. Again I wheeled the shape into it but this time […]