Jet powered beer cooler




What follows is my story about a shed, a warm beer and a home made jet engine. It is being presented for entertainment purposes only and no-one should attempt to emulate what I have done here. The risks should be obvious but it is worth pointing out that beer is a very dangerous substance when used without due care.

Please be careful!




UPDATE: Sunday 29th July 2001
As this site has appeared on www.slashdot.org and is experiencing slightly increased traffic I would like to add a few extra comments...

1. Guinness was used as it is an internationally recognised beer. I would have used a good, well known American beer but that is like finding the pot of gold at the end of a rainbow.
2. In my opinion I do not recommend using this technology for cooling overclocked AMD processors. Saying this has absolutely nothing to do with the fact that I work for another processor maker who I probably shouldn't mention but who want me to say you should all buy P4s.
3. Yes, I am the same guy who did the Star Wars Asciimation (www.asciimation.co.nz) thing a few years back and this is what I've been doing instead.
4. Sorry Mum.


UPDATE: Tuesday 21st May 2002
As you can see below I finally bought the small, old, British car I always wanted. For those interested it is a 1970 MGB-GT. Unfortunately this does present me with a problem. My shed is now somewhat lacking in space!

You will note the second, improved engine/beer cooler I built will not fit into the back of an MGB! I now plan to build a smaller, more portable version of the engine. Perhaps suitcase sized to make it handy to take to parties. What I need is a much smaller turbo. Something off a small car or a motorcycle perhaps.

If anyone in the Auckland area would like to sponser me a turbo I would be very glad to add their name and details as a thank you in helping to further the cause. Please contact me at
coldone @ this domain

Small, old, British AND jet powered?.


THE JET POWERED BEER COOLER

In New Zealand there are two things that are the essence of being a 'good Kiwi bloke'. These are of course playing rugby and having a shed.

Not being built for playing rugby I have had to go with the shed. I may not know a rugby hoop from a cricket stick but I know my shed like the head of my hammer. A shed is a place where a kiwi bloke spends much of his time alone surrounded by his tools, current and past half finished projects and the collection of parts and material usually referred to by others (typically wives/girlfriends) as 'that pile of junk'.

Here is a picture of my shed.

A bloke's shed is his castle.

My shed is in fact really a garage as I live in suburbia but for the purposes of this story a shed it will be. Luckily I don't own a car. If I ever do get a car it will be something to tinker with and be small, old and British. Just like my mum.

Here you see my shed just before I started working on something important and it became messy.

As has been mentioned many long and productive hours are spent in the shed by kiwi blokes. Many fine inventions such as the hydraulic sheep potter and the double headed golf club have been produced as the result of much blood, sweat and beers. And herein lies the dilemma.

Beer.

A session in the shed is typically an all day affair. Starting very early in the morning and going through until late at night when the light fades to the point that you can't see and hit your thumb with a hammer a bloke will not leave his shed for anything (Hint: Empty paint cans can be very useful here). All supplies must be taken in at the start of the shed session. And the most essential of these supplies is beer.

But how to keep the beer cold?

To illustrate the problem here is a typical scene inside the shed. This beer has been sitting on the bench for some time and as you can see it is at 14 C, not a temperature suitable for consumption!

Can't drink that!

A closer inspection of the can shows how it quite clearly states 'SERVE EXTRA COLD'. It is interesting to note that here is one of few times a bloke will actually read the instructions for anything. Ever.

What instructions?

Now this presented me with a problem. How do I keep my beer in the shed all day yet have it cold and ready to drink at a moments notice?

My first solution to this problem was ice. Here is a picture of some of the early experiments.

Ice, ice, baby!

Unfortunately that small quantity of ice would not keep multiple beers cold during the course of a day in the shed. And no, you cannot, not under any circumstances, put ice into the beer. No!

It was obvious I had to come up with a better solution to the problem.

I knew from some long forgotten physics lecture that when a liquid expands into a gas it will draw heat from its surroundings. And I happened to have a source of a suitable liquid right in my shed in the form of a LPG cylinder (liquid petroleum gas). Obviously it would not do to evaporate vast quantities of a flammable gas into the closed confines of my garage. That would probably be dangerous. What I needed was a way to remove the dangerous gas. The solution was obvious. The gas is flammable so why not burn it. Burning the gas with a normal burner would not use up the gas fast enough to give me any serious cooling. What I needed was a way to use up a lot of fuel very, very quickly.

What I needed was a jet engine!

As everyone knows jet engines use a lot of fuel. And a smallish one running in my shed would use up enough fuel from my gas bottle to sufficiently cool my beer.

I went to work. A jet engine in its simplest form consists of a COMBUSTOR where fuel is burnt to heat air, a TURBINE extracting energy from the heated air and a COMPRESSOR which is turned by the turbine to provide air to the combustor. I knew that a common turbocharger from a car engine has two of these three things, the compressor and the turbine. All I needed to add was the third, the combustor. After much investigating and designing and building and dodgy welding I built my engine.

Here it is after an early test run.

Yes, that really is a jet engine. Wonder if it will fit on that lawnmower?

You can see the cooling effect on the gas tank by the layer of ice that forms on it.

Brrrrr!

All that was necessary now was to place the tank in a container holding a quantity of water and add the cans of beer and fire this baby up!

The jet powered beer cooler!

The more observant of you may notice the air hose joining the compressor to the combustor was replaced with a PVC pipe. This was a very, very bad idea as PVC gets soft when it gets hot and it tends to part company with the engine at the most inopportune moments!

And now the results.

The experiment was a complete success (apart from that PVC thing). Here is the LPG tank in water before an engine run with the beer at 11 C. The rubber cord over the tank is to stop it bobbing about in the water (as the beer cans do).

Not cold enough yet.

And here is the final result after running the engine for about 5 minutes. The engine itself will run at up to 100000 rpm with exhaust temperatures of around 500 C and noise levels in excess of 125 dBA. The beer is successfully chilled to a nice cool 2 C.

Fancy a cold one?

Which is a very good thing because a cold beer is just what you need when you're standing in shed with a jet engine running in the middle of it heating things up!



COMING SOON - Kerosene fuelled afterburner/sausage sizzler!


Useful links.

Howstuffworks - Beer
Howstuffworks.com entry on how beer works.

Howstuffworks - Gas turbine engine
Howstuffworks.com entry on how jet engines work.

http://www.asciimation.co.nz/turbine
How I built my jet engine.

Machine Shop Trade Secrets
http://www.Proshoppublishing.com
James A. Harveys Machine Shop Trade Secrets book.


Email: coldone @ this domain



Copyright © 2001 - 2004 Simon Jansen